Quantification of the frontotemporal orbitozygomatic approach using a three-dimensional visualization and modeling application

Anthony L. D'Ambrosio, J. Mocco, Todd C. Hankinson, Jeffrey N. Bruce, Harry R. Van Loveren

Research output: Contribution to journalArticlepeer-review

14 Scopus citations

Abstract

OBJECTIVE: We sought to simulate the frontotemporal orbitozygomatic (FTOZ) craniotomy in a three-dimensional virtual environment on patient-specific data and to quantify the exposure afforded by the FTOZ while simulating controlled amounts of brain retraction. METHODS: Four computed tomographic angiograms were reconstructed with commercially available software (Amira 4.1.1; Mercury Computer Systems, Inc., Chelmsford, MA), and virtual FTOZ craniotomies were performed bilaterally (n = 8). Brain retraction was simulated at 1 and 2 cm. Surgical freedom and projection angle were measured and compared at each stage of the FTOZ. RESULTS: At 1 cm of retraction, surgical freedom increased by 27 ± 14% for the removal of the orbital rim and by 31 ± 18% for FTOZ (P < 0.01) when compared with frontotemporal (FT) craniotomy. At 2 cm of retraction, surgical freedom increased by 15 ± 5% and 26 ± 8% for the removal of the orbital rim and FTOZ, respectively (P < 0.01). With increased retraction, surgical freedom increased by 100 ± 26%, 81 ± 15%, and 82 ± 27% for the FT, removal of the orbital rim, and FTOZ craniotomies, respectively (P < 0.001). Projection angle increased by 24.2% when orbital rim removal was added to the FT craniotomy (P < 0.01). CONCLUSION: Surgical freedom increases significantly at every step of the FTOZ craniotomy. This effect is less robust when brain retraction is increased. Brain retraction alone has a greater impact on surgical freedom than bone removal alone. Projection angle is significantly increased when orbital rim removal is added to the FT craniotomy. This model overcomes two major limitations of cadaver-based models: quantification of brain retraction and incorporation of patient-specific anatomy.

Original languageEnglish
Pages (from-to)ONS251-ONS260
JournalNeurosurgery
Volume62
Issue number3 SUPPL. 1
DOIs
StatePublished - Mar 2008
Externally publishedYes

Keywords

  • Approach
  • Cranial base
  • Quantification
  • Skull base
  • Surgical simulation
  • Three-dimensional
  • Validation

Fingerprint

Dive into the research topics of 'Quantification of the frontotemporal orbitozygomatic approach using a three-dimensional visualization and modeling application'. Together they form a unique fingerprint.

Cite this