Effect of processing parameters on the magnetic properties of strontium ferrite sintered magnets using Taguchi orthogonal array design

Puneet Sharma; Amitabh Verma; R. K. Sidhu; O. P. Pandey

doi:10.1016/j.jmmm.2006.03.063

Effect of processing parameters on the magnetic properties of strontium ferrite sintered magnets using Taguchi orthogonal array design

Puneet Sharma, Amitabh Verma, R. K. Sidhu, O. P. Pandey

Research output: Contribution to journal › Article › peer-review

43 Scopus citations

Abstract

In the present paper, influence of various processing parameters on the magnetic properties of strontium ferrite sintered permanent magnets has been studied. Taguchi L-9 orthogonal array design is used for analyzing the effect of Fe₂O₃/SrO mole ratio, milling time, calcination temperature and sintering temperature on the magnetic properties. The individual effect of each parameter on the magnetic properties in correlation with microstructure and phase formation is discussed. It is found that Taguchi design is adequate to understand the effect of processing parameter in the limited number of experiments.

Original language	English
Pages (from-to)	157-164
Number of pages	8
Journal	Journal of Magnetism and Magnetic Materials
Volume	307
Issue number	1
DOIs	https://doi.org/10.1016/j.jmmm.2006.03.063
State	Published - Dec 2006
Externally published	Yes

Keywords

Magnetic materials
Magnetic properties
Microstructure
Strontium ferrite
X-ray diffraction

Access to Document

10.1016/j.jmmm.2006.03.063

Cite this

@article{13bce9435a564102b3c8056c4f6f4188,

title = "Effect of processing parameters on the magnetic properties of strontium ferrite sintered magnets using Taguchi orthogonal array design",

abstract = "In the present paper, influence of various processing parameters on the magnetic properties of strontium ferrite sintered permanent magnets has been studied. Taguchi L-9 orthogonal array design is used for analyzing the effect of Fe2O3/SrO mole ratio, milling time, calcination temperature and sintering temperature on the magnetic properties. The individual effect of each parameter on the magnetic properties in correlation with microstructure and phase formation is discussed. It is found that Taguchi design is adequate to understand the effect of processing parameter in the limited number of experiments.",

keywords = "Magnetic materials, Magnetic properties, Microstructure, Strontium ferrite, X-ray diffraction",

author = "Puneet Sharma and Amitabh Verma and Sidhu, {R. K.} and Pandey, {O. P.}",

year = "2006",

month = dec,

doi = "10.1016/j.jmmm.2006.03.063",

language = "English",

volume = "307",

pages = "157--164",

journal = "Journal of Magnetism and Magnetic Materials",

issn = "0304-8853",

publisher = "Elsevier B.V.",

number = "1",

}

TY - JOUR

T1 - Effect of processing parameters on the magnetic properties of strontium ferrite sintered magnets using Taguchi orthogonal array design

AU - Sharma, Puneet

AU - Verma, Amitabh

AU - Sidhu, R. K.

AU - Pandey, O. P.

PY - 2006/12

Y1 - 2006/12

N2 - In the present paper, influence of various processing parameters on the magnetic properties of strontium ferrite sintered permanent magnets has been studied. Taguchi L-9 orthogonal array design is used for analyzing the effect of Fe2O3/SrO mole ratio, milling time, calcination temperature and sintering temperature on the magnetic properties. The individual effect of each parameter on the magnetic properties in correlation with microstructure and phase formation is discussed. It is found that Taguchi design is adequate to understand the effect of processing parameter in the limited number of experiments.

AB - In the present paper, influence of various processing parameters on the magnetic properties of strontium ferrite sintered permanent magnets has been studied. Taguchi L-9 orthogonal array design is used for analyzing the effect of Fe2O3/SrO mole ratio, milling time, calcination temperature and sintering temperature on the magnetic properties. The individual effect of each parameter on the magnetic properties in correlation with microstructure and phase formation is discussed. It is found that Taguchi design is adequate to understand the effect of processing parameter in the limited number of experiments.

KW - Magnetic materials

KW - Magnetic properties

KW - Microstructure

KW - Strontium ferrite

KW - X-ray diffraction

UR - http://www.scopus.com/inward/record.url?scp=33748447098&partnerID=8YFLogxK

U2 - 10.1016/j.jmmm.2006.03.063

DO - 10.1016/j.jmmm.2006.03.063

M3 - Article

AN - SCOPUS:33748447098

SN - 0304-8853

VL - 307

SP - 157

EP - 164

JO - Journal of Magnetism and Magnetic Materials

JF - Journal of Magnetism and Magnetic Materials

IS - 1

ER -

Effect of processing parameters on the magnetic properties of strontium ferrite sintered magnets using Taguchi orthogonal array design

Abstract

Keywords

Access to Document

Fingerprint

Cite this