Beam position monitor for the SPring‐8 synchrotron

T. Aoki; H. Yonehara; H. Suzuki; N. Tani; H. Abe; K. Fukami; S. Hayashi; Y. Ueyama; T. Kaneta; K. Okanishi; S. Ohzuchi; T. Miyaoka; K. Sato; E. Toyoda; H. Ito; Hideaki Yokomizo

doi:10.1063/1.1147475

Beam position monitor for the SPring‐8 synchrotron

T. Aoki
, H. Yonehara
, H. Suzuki
, N. Tani
, H. Abe
, K. Fukami
, S. Hayashi
, Y. Ueyama
, T. Kaneta
, K. Okanishi
, S. Ohzuchi
, T. Miyaoka
, K. Sato
, E. Toyoda
, H. Ito
, Hideaki Yokomizo

Research output: Contribution to journal › Article › peer-review

Abstract

Beam position monitors (BPMs) for the SPring‐8 synchrotron have already been designed and manufactured. Each BPM pickup has four button‐type electrodes, and the output signals from the electrodes are switched by fast PIN‐diode and are measured by signal detection systems. Eighty BPMs and four detection systems are placed around the synchrotron. Calibration of beam position of the 80 BPMs was finished successfully. In this paper, we present the structure of the BPM pickup, the electronics of the signal detection system, and the calibration system.

Original language	English
Pages (from-to)	3367
Number of pages	1
Journal	Review of Scientific Instruments
Volume	67
Issue number	9
DOIs	https://doi.org/10.1063/1.1147475
State	Published - Sep 1996
Externally published	Yes

Keywords

BEAM MONITORS
BEAM POSITION
CALIBRATION
DESIGN
ELECTRONIC CIRCUITS
SPECIFICATIONS
SPRING−8 STORAGE RING
SYNCHROTRON RADIATION SOURCES
X−RAY EQUIPMENT

Access to Document

10.1063/1.1147475

Cite this

@article{83c6d2148fad4d99922808d2a8145f53,

title = "Beam position monitor for the SPring‐8 synchrotron",

abstract = "Beam position monitors (BPMs) for the SPring‐8 synchrotron have already been designed and manufactured. Each BPM pickup has four button‐type electrodes, and the output signals from the electrodes are switched by fast PIN‐diode and are measured by signal detection systems. Eighty BPMs and four detection systems are placed around the synchrotron. Calibration of beam position of the 80 BPMs was finished successfully. In this paper, we present the structure of the BPM pickup, the electronics of the signal detection system, and the calibration system.",

keywords = "BEAM MONITORS, BEAM POSITION, CALIBRATION, DESIGN, ELECTRONIC CIRCUITS, SPECIFICATIONS, SPRING−8 STORAGE RING, SYNCHROTRON RADIATION SOURCES, X−RAY EQUIPMENT",

author = "T. Aoki and H. Yonehara and H. Suzuki and N. Tani and H. Abe and K. Fukami and S. Hayashi and Y. Ueyama and T. Kaneta and K. Okanishi and S. Ohzuchi and T. Miyaoka and K. Sato and E. Toyoda and H. Ito and Hideaki Yokomizo",

year = "1996",

month = sep,

doi = "10.1063/1.1147475",

language = "English",

volume = "67",

pages = "3367",

journal = "Review of Scientific Instruments",

issn = "0034-6748",

publisher = "American Institute of Physics",

number = "9",

}

TY - JOUR

T1 - Beam position monitor for the SPring‐8 synchrotron

AU - Aoki, T.

AU - Yonehara, H.

AU - Suzuki, H.

AU - Tani, N.

AU - Abe, H.

AU - Fukami, K.

AU - Hayashi, S.

AU - Ueyama, Y.

AU - Kaneta, T.

AU - Okanishi, K.

AU - Ohzuchi, S.

AU - Miyaoka, T.

AU - Sato, K.

AU - Toyoda, E.

AU - Ito, H.

AU - Yokomizo, Hideaki

PY - 1996/9

Y1 - 1996/9

N2 - Beam position monitors (BPMs) for the SPring‐8 synchrotron have already been designed and manufactured. Each BPM pickup has four button‐type electrodes, and the output signals from the electrodes are switched by fast PIN‐diode and are measured by signal detection systems. Eighty BPMs and four detection systems are placed around the synchrotron. Calibration of beam position of the 80 BPMs was finished successfully. In this paper, we present the structure of the BPM pickup, the electronics of the signal detection system, and the calibration system.

AB - Beam position monitors (BPMs) for the SPring‐8 synchrotron have already been designed and manufactured. Each BPM pickup has four button‐type electrodes, and the output signals from the electrodes are switched by fast PIN‐diode and are measured by signal detection systems. Eighty BPMs and four detection systems are placed around the synchrotron. Calibration of beam position of the 80 BPMs was finished successfully. In this paper, we present the structure of the BPM pickup, the electronics of the signal detection system, and the calibration system.

KW - BEAM MONITORS

KW - BEAM POSITION

KW - CALIBRATION

KW - DESIGN

KW - ELECTRONIC CIRCUITS

KW - SPECIFICATIONS

KW - SPRING−8 STORAGE RING

KW - SYNCHROTRON RADIATION SOURCES

KW - X−RAY EQUIPMENT

UR - https://www.scopus.com/pages/publications/85024810092

U2 - 10.1063/1.1147475

DO - 10.1063/1.1147475

M3 - Article

AN - SCOPUS:85024810092

SN - 0034-6748

VL - 67

SP - 3367

JO - Review of Scientific Instruments

JF - Review of Scientific Instruments

IS - 9

ER -

Beam position monitor for the SPring‐8 synchrotron

Abstract

Keywords

Access to Document

Fingerprint

Cite this